Thanks Mandopicker. I have replied by PM.
CityCyclingEdinburgh Forum » Stuff
MULTI-COLOURED (not just yellow) SWAPSHOP
(902 posts)-
Posted 8 years ago #
-
Sorted for wheels - thanks again Mandopicker.
Posted 8 years ago # -
A pair of unused Schwalbe Winter tyres 26 X 1.75: £15
Unused SRAM PG850 12-28 8 speed cassette: £5
PM me if interested, otherwise they are going to The Bike Station....
Posted 8 years ago # -
You have PM about the cassette.
Posted 8 years ago # -
Clipless pedals still available. About to chuck them on GumBay, so PM today if interested.
Pair of used Shimano M520 SPD clip less pedals, black, with removable flat pedal insert on one side. Removed from a recently purchased second hand bike. Bearings seem in good condition, some scratches etc. but all intact, working.
Sell for a tenner, otherwise swap for one of the following:
- 700c x 28mm Marathon (or Marathon Plus) tyre in good condition
- 8 speed/triple or friction bar end shifters for Shimano transmissionPosted 8 years ago # -
Crowriver
PM sent.
Cheers
ColinPosted 8 years ago # -
Does anyone want to try a Powerbreathe?. It is the basic model. I used to use it when I rowed competatively but it is just sitting in a drawer now.
Posted 8 years ago # -
PS. It is easily sanitised with Milton or similar.
Posted 8 years ago # -
Now surplus to requirements, a suspension mount for Hamax child seats like the Smiley, Sleepy, Siesta (and compatible designs from Halfords, etc.). This one is designed for mounting onto smaller frames, e.g.. many MTB or 'compact' frames, women's step through frames, etc. Basically any frame where the rear stays are lower than a standard diamond frame. We used this on a Giant Boulder and a Globe hybrid, for example. Pushes the seat higher and further back relative to the seat tube, rear stays and thus gives greater heel clearance.
Used but still in excellent nick, like new. Here's a pic from a web retailer:
Currently priced new at around £22 best online deal.
Sell for a tenner, otherwise swap for one of the following:
- 700c x 28mm Marathon (or Marathon Plus) tyre in good condition
- 8 speed/triple or friction bar end shifters for Shimano transmission
- Sturmey Archer 3 speed bar end shifter or 'Pashley' thumb shifter (not the old school trigger shifter).Posted 8 years ago # -
After having only 3h of daylight time over the holidays for me-stuff I abandoned my dreams of being able to maintain my spare or rebuild my old frame as a singlespeed and ordered enough bits to make a new singlespeed to be my new spare. I will therefore have some spare bits sitting about, which will be Bike Stationed unless anyone wants them.
1 * XL (25"ish?) black Edinburgh "Town and Trail Connect" ten-speed from the early nineties, with a newish (direct mount) rear mech, rear wheel with newish freewheel, newish chain and possibly a front wheel if my spare front wheel is still in the shed. Canti brakes (with Kool Stop salmon pads), thumbshifters on straight bars, full SKS mudguards and a kickstand. I probably have enough old tyres to put 25mm Armadilloes on both ends.
1 * L (56cm?) red aluminium 2006 Revolution Continental Race frame. Considerable paint loss. Mudguard/rack mounts on the rear triangle and a seatclamp-with-rack-mounts. Can be supplied with a free custom cut-down Vavert mudguard which ends at the brake bridge (under which no mudguard can pass).
1 * 'Evo'? 700C black CrMo front fork (1/1/8" steerer, which is still quite long). Mudguard and rack mount points. 35mm Vavert mudguard still attached, which permits a 25mm tyre.
1 * front and 1* rear Shimano dual-pivot caliper brakes, the rear of which is possibly 105; the front might also be 105 but might be 4600-level Tiagra. The rear is still currently attached to the Revolution frame and the front to the black steel fork.Posted 8 years ago # -
Free to a good home an EBC Revolution Glider tag-along complete with instructions, hitch and the shims to fit the hitch to your seatpost.
An easy way to take your little cyclist (aged 4ish - 7ish) on longer rides or in places where you're not confident for them to cycle on their own (the school run on busy roads, perhaps).
They have one wheel and their own pedals and handlebars. Comes to pieces and folds up so easy to store and will fit in a car.
Ours is black. Well-used and with some superficial rust because it lives outside, but this is cosmetic: it's been regularly oiled in the all the right places, there's lots of life left in the tyres and chain and it's good for many miles yet.
Collect from Morningside. PM me if interested.
Posted 8 years ago # -
Pm sent
Posted 8 years ago # -
I have more bike parts than I could possibly ever live with. Think it is time to clear the garage out but thought I'd post on here before I hit gumbay with these. Open to offers or swaps (in need of a comfy saddle for my MTB, MTB pedals, swissstop brake pads). If anyone is interested in any of the items drop me a PM - everything is new unless otherwise stated. I have more than I listed here but this ad is probably approaching biblical length already!
Tyres
2 x Schwalbe Active Delta Cruiser White 37 - 622 (28 x 1.4 -35 x 700C)2 x Duro Cordoba Black 37-622 (32 x 700C)
1 x Kenda SmallBlockEight 50-406 (20x1.95)
4 x Kenda SmallBlockEight 37-451 (20x1 3/8)
1 x Duro BMX Freestyle Orange HF-884 (20 x 1.95)
1 x Kenda 54-254 (14 x 2.125)
Wheels
1 x Raleigh RGH931 FT WHL 700C Alloy Rim SLVR Alloy Hub 36H QR1 x Mavic GP4 Rims with Campagnolo Record Hubs Wheelset (used vintage set - hubs are in good nick)
1 x Raleigh RGH800 FT WHL Steel Nuttd 24x1.75 Alloy Rim
1 x Fisher Outdoor Leisure WILW1190D Mach1 EXE 26x1.75 Black D/W Q/R Disc Front ETRTO 559x19c Quando Hub
1 x Raleigh Pro-Build SWH615H Mavic MX 719 Rims ETRTO 559x21 Shimano Deore Hub HB-M530 Q/R
A pile of 26" rims too - for any prospective wheel-builders!
Mudguards
1 x M-Part Commute 26" 60mm Black1 x M-Part Commute 700c 45mm Black
1 x M-Part Commute 700c 45mm Silver
1 x M-Part Commute 700c 55mm Silver
1 x BBB Road Catcher MTB Fender BFD-04
1 x BBB Rain Warriors Front and Rear Fender 24"-26" BFD-01
Pedals
I have a pile of Wellgo BMX pedalsDisc brake pads
1 x XLC Disk Brake Pads Tektro 10x BP-0231 x BBB DiscStop Disc Brake Pads Comp. W. Magura Julie BBS-33
1 x XLC Disk Brake Pads Tektro 10x BP-023
2 x BBB DiscStop Disc Brake Pads Comp. W. Tektro io/novella
1 x Fastop Competition Brake Pads NAO Kevlar composite Comp. W. AZ-560 Giant MPH 2001
1 x Fibrax Semi Metallic Disc Pads Magura Julie Caliper ASH 968
2 x Marwi Organic Disc Brake Pads DBP-26 for Hayes Sole /MX2 /MX3
2 Avid Juicy BB7 Disc Brake Pads Metal Scintered Pad Steel Backing Plate
1 x Avid Disc Brake Pads (organic compund) fits BB7 and all Juicy Brakes
3 x Shimano Disc Brake Pads XT SLX Alfine
Normal brake pads
6 x Clarks MTB/V-Type/Hybrid 60mm Cantilever block - post type CP110Posted 8 years ago # -
"I have more bike parts than I could possibly ever live with"
I'm not ready to say that yet...
Nothing on your list I 'need' (or any of the things you want as a swap), just one question -
Why so many brake pads?
Posted 8 years ago # -
"Why so many brake pads?"
It is a loooong story - better shared over a beer than on an internet forum. Suffice to say it involves a good dollop of ignorance on my part! Not quite ready to commit it to ASCII just yet! :)
Posted 8 years ago # -
Ok!
Posted 8 years ago # -
Can I interest anyone in a set spd cleats I seem to have acquired a few sets. Call it a fiver each?
I've got three lots of Shimano SH51 Cleats
Posted 8 years ago # -
I'd like one of the sets please, Steveo.
I also have a pair of the multi-release ones that I'm unlikely to use.
Posted 8 years ago # -
We could swap if you like arellcat I'll use those type. I'm not nearly graceful enough to use the single release type!
Posted 8 years ago # -
One set accounted for, any one else want a set before they go on Gumbay?
Posted 8 years ago # -
YHM Steveo. I could actually use a second pair of SH51s!
Posted 8 years ago # -
All yours Arellcat. One set left. Any one?
Posted 8 years ago # -
Hi I have a pair of used spd pedals pd-m505 scuffed but ok and one pair of (still in packet) spd cleat set sh56 both for 20 quid or a tenner each
Posted 8 years ago # -
I have some handlebars and a stem that are surplus to requirements. Thought I would post on here before going to gumtree/e bay. Items as follows:
Salsa Woodchipper handlebars. 44cm. 31.8 clamp. These have quite an aggressive flare design-about 26 degrees-and I think they are a bit like marmite. You either love 'em or hate 'em! I have found I am in the latter camp! Virtually unused. Charlie the Bikemonger doing them for £65.99. I would accept £30.
2 sets of Nitto Noodle handlebars. 44cm. NOTE 26mm clamp diameter. Shallow drops-good for fixies, touring. Good condition-some minor marks from tape and brake levers.£30 new. Looking for £10 each.
1 Nitto 1" quill stem. 26mm clamp. 90mm length x 190mm. Excellent condition.£42 new. Looking for £15.
Posted 8 years ago # -
Revolution track pump.
To all intents and purposes, this rather handsome looking pump works. However it has a "dual function" valve head, and I have never got it to work satisfactorily with Schrader valves (car type). Until last week it was just dandy at inflating Presta valves, but now I can't get it to do that either. No problem with the seals, barrel, or pressure gauge. Just the nozzle.
So, free to someone who either has lucky track pump fingers or has the know-how/patience to service the valve head or replace it.
PM me if interested.
Posted 8 years ago # -
£80 - A "sensible" fixed gear, with eyelets for racks and mudguards and fat pot-hole comfortable tyres. Need to sell it to make space.
Would suit someone about 6ft as it's the largest size planet-x made.
Model is One-one Pompino with stronglight crank (47x16 ratio I believe), comes with both sets of stems and handlebars.
Requires inner tubes, new chain and brake adjustment but it's good to ride.
All the pictures are HERE . Any questions, PM us.
Posted 8 years ago # -
PM'd...
Posted 8 years ago # -
I have a request - does anyone have an old fashioned type bike pump lying about? Like the ones that used to fit on the downtube of your 10 speed racer? If so I'd be glad to take it off your hands. I am trying to resurrect an old bike.
Posted 8 years ago # -
Do mean "framefitting" - ie not needing pump pegs?
What length?
Posted 8 years ago # -
It doesn't necessarily need to be able to fit on the frame. I am just trying to describe an old pump that most people wouldn't want to be bothered with any more in these days of double action mini pumps or track pumps. There should really be one lying around in the garage with the bike in question but for some inexplicable reason there isn't.
Posted 8 years ago #
Reply »
You must log in to post.
posts
